DIY Soil Sifter

comments (15) February 15th, 2010

Pin It

yourownvictorygarden Greg Holdsworth, contributor
thumbs up 7 users recommend


When it comes to soil preparation for seed starting, I have come up with a "recipe" that includes the regular seed starting mix, potting soil, and perlite/vermiculite. I may "season" it with coffee grounds, epsom salt, and worm castings :). I add the potting soil to the seed starting mix because it's too light IMO for transplants; that is, they are already tough enough for rougher soil. Here's the problem - the potting soils I've tried all seem to contain pieces of wood and the occasional rock... not what you want.

So, I've come up with a way to separate the larger unwanted objects from the soil. A historical homage to the gold mining days has inspired my latest DIY project - the soil sifter. Of course, this can also be used for compost, gravel, large seeds, etc. The one I've built is small for sifting soil into a plastic tub, but you can build yours to whatever size you need.

But what about using a simple cooking colander? Believe me, I've looked everywhere for one that has the right size holes for the job, and have been unsuccessful. I feel it's worth the time and trouble of removing unwanted objects in the soil (my tomatoes thank me for it later!).

The list of things you'll need:

• Piece of 1" x 4" x 6' plywood. The size you'll need will depend on how large a sifter you're building. You may only need one piece.
• Saw - manual or power electric
• 12-20 Nails (1 - 1 1/2" will do nicely)
• Hardware cloth (I chose the size with 1/4" spaces/squares)
• Hammer
• Wire cutters
• Pencil and tape measure for, um, measuring

Construction

1. Determine how large you want your sifter to be to determine the dimensions
2. Mark out the width twice and the length twice on the piece of plywood to create the four sides
3. Cut the four pieces out, making sure the cuts are as straight and clean as possible
4. Start the nails in two of the boards to make it easier when you are hammering the four pieces together
5. Hammer the four pieces together
6. Cut a square piece of hardware cloth large enough to not only cover the width and length of the wooden frame, but also to fold over into the sides of the frame
7. Fold over the edges of the hardware cloth to snugly fit inside the wood frame
8. Staple the folded edges to the sides of the wood frame, securing it
9. Sand the edges and sides of the wood frame to eliminate any possibilities of slivers
10. Test it. If it's OK, you're done

Enjoy... and start sifting!


After you try it, show it off to other members in the
gardener's gallery.
Post your photos


posted in: soil, wood, garden projects

Comments (15)

martinblair54 writes: Brilliant
Posted: 5:06 am on November 4th
Bethanymullins writes: Great ideas
Posted: 2:37 am on October 28th
Anniebranett writes: Thanks for share its great idea to ready humus
Posted: 1:57 am on September 16th
Mariewhite writes: Magnificent..I like your all projects
Posted: 12:21 pm on August 12th
ryangreer22 writes: keep it up
Posted: 3:12 am on July 27th
PinduDablar writes: AWESOME.....
Posted: 1:37 am on March 31st
KeithMullins writes: Grrreeeaat....soil preparation for seed starting
Posted: 11:23 pm on March 30th
LattisaArora writes: Great one project
Posted: 11:05 pm on March 30th
BalluBachlor writes: Good Job
Posted: 12:49 am on March 29th
solomon9 writes: Really great.
Posted: 4:47 am on February 26th
RandyFish writes: your great ideas.
Posted: 2:00 am on February 18th
RixonJoy writes: Very inspiring
Posted: 12:22 am on February 16th
Dysonste writes: very nice
Posted: 2:48 am on July 2nd
Creative_Concepts writes: Thank you very much for this fun, simple and practical project. With a little scaling up, this sifter will be perfect for my organic garden needs.
Posted: 9:39 am on March 11th
ChrisMcLaughlin writes: Love this, Greg! (Where were you when I needed hand-sifter plans for my book?)
Posted: 11:22 am on February 16th
Log in or create a free account to post a comment.